How to Get Plastic Logo off Sweatshirts

If you have ever bought a sweatshirt with a plastic logo or emblem, you may have noticed that the logo can start to peel or crack after a while. This can be frustrating, especially if you are attached to the logo or if it was a gift. Luckily, there are some simple tricks to get plastic logos off sweatshirts without ruining the fabric.

Tools You Will Need

Before you start, make sure you have the proper tools to remove the plastic logo from your sweatshirt. You will need a flathead screwdriver, a pair of scissors, a hairdryer or heat gun, and some rubbing alcohol. Optional tools that may also be helpful include a small knife or razor blade, a cloth or sponge, and some soap or detergent.

Subtitles:

1. Heating the Plastic

2. Scrape off the Plastic

3. Clean Up Residue

4. Spot Test

5. When to Hire a Professional

Heating the Plastic

Using a hairdryer or heat gun, carefully heat up the plastic logo on your sweatshirt. Start by holding the hairdryer a few inches away from the logo, and gradually move it closer until the plastic starts to soften. This can take a few minutes, so be patient and make sure you do not overheat the fabric. Once the plastic is hot and pliable, you can start to peel it off.

Scrape off the Plastic

Using a flathead screwdriver or small knife, carefully peel off the plastic logo from your sweatshirt. Use small, gentle motions to avoid damaging the fabric, and be sure to keep the screwdriver or knife at an angle so you do not cut into the fabric. If the plastic is not coming off easily, you can reheat it with the hairdryer and try again. Be careful not to let the plastic cool too much, as it will become more brittle and difficult to remove.

Clean Up Residue

Once the plastic logo is removed, you may notice some residue or adhesive left behind on your sweatshirt. This can be removed with a cloth or sponge soaked in rubbing alcohol. Gently rub the affected area until the residue is dissolved, and then rinse the fabric with water and dry it thoroughly. If there is still residue left after using rubbing alcohol, try using a small amount of soap or detergent and gently scrubbing the area.

Spot Test

Before you try any of these methods on your sweatshirt, it is important to do a spot test on a small, inconspicuous area of the fabric. This will help you determine whether the fabric is sensitive to heat or chemicals, and whether the method you choose will work effectively. If your sweatshirt is made of a delicate or synthetic fabric, it may be best to take it to a professional cleaner to avoid damage.

When to Hire a Professional

If you have tried all of these methods and still cannot remove the plastic logo from your sweatshirt, or if you are worried about damaging the fabric, it may be best to take it in to a professional cleaner. They will be able to use specialized equipment and techniques to remove the logo without damaging the fabric, and they can also clean and restore the fabric to its original condition.

In conclusion, removing a plastic logo from a sweatshirt can be a daunting task, but with the right tools and techniques, it can be done easily and effectively. Be sure to heat the plastic before scraping it off, and use rubbing alcohol or soap to remove any residue left behind. Remember to spot test your sweatshirt first, and if necessary, enlist the help of a professional cleaner to avoid damaging the fabric. With these tips, you can restore your sweatshirt back to its original condition, and be proud of wearing it once again!